Konica Stainless Steel Bin 10L

The Konica Stainless Steel Bin by AKA is a compact, open-top wastebasket with a 10L capacity. Its tapered body gives the product a distinct profile, while the steel exterior, black rim and black base create a simple two-tone appearance. Measuring 30 × 26 cm, Konica offers an option for offices, home workspaces and guest rooms where a small bin is more appropriate than a large floor-standing container.

A Tapered Profile with an Open Top

Konica is wider at the opening and narrower towards the base. This tapered shape distinguishes it from straight-sided cylindrical bins. The catalogue design also shows rows of small perforations around the lower body, adding detail without changing the overall clean appearance. Black trim frames the upper edge and base, giving the steel body a clear outline.

The open top provides direct access for small, everyday items such as paper and packaging. There is no lid to lift or pedal to operate. This format can be convenient beside a desk or in a reading area, especially when quick access matters more than concealing the contents.

Konica Stainless Steel Bin Specifications

Model	Konica Bin
Capacity	10 Liters
Dimensions	30 × 26 cm
Body	Stainless Steel
Format	Tapered, open top
Catalogue appearance	Steel body with black rim and base

Choosing a 10L Bin for Your Space

A 10L bin can suit a single workstation, a bedroom or a small reception desk with modest waste volumes. Before choosing a position, compare the listed dimensions with the available space and leave the opening accessible. When placing a bin under a desk, also consider legroom and the route used to remove it for emptying.

For a project with several rooms, using the same model can provide a consistent appearance. However, each location may need a different capacity. Shared areas with more users or larger items may be better served by a larger bin; capacity should follow the actual use of the space.

Where Konica Fits Best

• Individual office desks and home workspaces
• Hotel guest rooms and bedrooms
• Reading areas and small meeting rooms
• Reception desks with limited waste volumes

These are suggested applications for its size and open-top design. An open wastebasket does not conceal contents or provide a closed barrier. For food waste, shared washrooms or locations that require covered disposal, choose a suitable lidded model instead.

Selecting and Specifying Your Bin

When making an enquiry, include the Konica model name, 10L capacity, quantity and intended location. Use the listed 30 × 26 cm dimensions when checking the fit. The catalogue shows a steel body with black trim; ask AKA to confirm any other colour or finish before specifying it for a project.

For an alternative with foot-operated opening, compare the AKA stainless steel pedal bin. Konica is the simpler choice when you prefer a compact wastebasket with an accessible open top.

Frequently Asked Questions

What size is the Konica bin? The catalogue lists one 10L version, with dimensions of 30 × 26 cm.

Does Konica have a pedal or closing lid? No. The catalogue model has an open top, so disposal does not require a pedal or lid movement.

Which colour is shown? The reference model has a steel body with a black upper rim and black base. Other finishes should be confirmed with AKA before ordering.

COMPACT EVERYDAY DESIGN

A Small Bin with a Distinctive Profile

Konica offers direct, open-top access in a compact 10L format. Its tapered body, lower perforated detail and contrasting black rim and base suit modern offices, home workspaces and guest rooms.

10L
Compact Capacity

Open Top
Direct Access

Tapered
Distinctive Profile

Understanding the entry shape

The opening is a useful starting point when comparing this model with other AKA bins. A fully open top, an inclined entry and a domed front-facing opening create different approaches to the container. Examine the model-specific description and feature list rather than treating these shapes as interchangeable. Position the entry toward the direction from which it will normally be used. Keep furniture and doors out of that approach so that the visible opening remains accessible after the surrounding space is furnished.

Matching the size to the collection point

Capacity describes nominal volume; it does not, by itself, describe the body’s footprint or height. Review every relevant size row in the table below. Where two entries have the same capacity, their proportions can still differ. Check the actual location with a tape measure and compare those measurements with the recorded dimensions. For several collection points, use the same model family where a consistent appearance matters, while selecting each size according to the space and anticipated emptying routine.

Choosing an open-entry layout

An entry that is already open avoids a separate lid-opening action during disposal. That can be useful where quick access is the main selection criterion. It also means that the shape should be evaluated for the intended waste stream and the visual requirements of the room. An open or hooded appearance should not be interpreted as an air-tight seal, odor-control system or specialized safety rating. If the project requires any such property, ask for a model with that specification explicitly documented.

Reviewing the complete arrangement

Before fixing the position, consider how the container will be emptied and how the floor around it will be cleaned. Do not place the bin so tightly between other objects that its upper section or side opening becomes awkward to reach. In a front-opening design, the orientation is especially important; in an open-top design, clear access from above matters. Use the selected size and model name when requesting internal-container information, because an exterior photograph alone cannot establish all of the parts supplied.

Exterior choices

Steel

The options above are the documented exterior choices for this record. Screen swatches are an indication, not a physical color standard. Where a combination names both body and top, keep the complete name in your selection. Availability of a particular combination for a particular size can be confirmed with AKA sales.

Reading the size table

The size table on this page is the reference for the variants recorded under this model. A capacity field and a dimension field answer different questions: capacity is a volume, while dimensions describe the physical space occupied. Keep the complete size row when comparing products. If a row contains an original dimension string without named axes, retain that string in the inquiry and ask for the corresponding technical drawing when necessary. Do not rearrange the numbers based on how tall or wide the product appears in a photograph. Fields that are not specified should not be treated as zero.

Choosing for the actual room

Think about the route people take through the room, the objects beside the product and the practical access needed for its normal use. A product that looks balanced in a staged photograph may need a different position in your own layout. For a project with several units, make a short list of positions and assign the model and size to each. Evaluate placement suggestions against the actual waste stream or accessory use; they are planning guidance rather than a technical certification for every environment.

Surface appearance and fingerprints

Fingerprint resistance is a shared surface property of the AKA range. It does not remove the need for routine cleaning or mean that the surface can never show marks. The visible result also depends on light and viewing angle: reflections on a steel or gold exterior can make a photographed surface appear brighter or darker. When matching several items, review them in the intended lighting and confirm the exterior combination. Keep surface properties separate from color names and from any unverified claim about the alloy grade.

Care and cleaning

Follow the care instructions supplied for the exact product and finish. For routine exterior care, use a soft, clean cloth and a cleaning method confirmed as suitable for that surface. Avoid abrasive treatment or experimenting with strong products when compatibility has not been established. Pay attention to the rim, base and areas touched during normal use. Treat removable components according to their own instructions, and do not assume that a lid assembly or other mechanism can be immersed simply because the body has a steel appearance.

A useful specification for AKA sales

A clear inquiry helps distinguish similar products and reduces the need for follow-up questions. Include the model name, selected size row, exterior color combination and the number of units required. Add the intended position and any clearance restriction that may affect the choice. If your project requires a specific technical property, list it as a requirement to be confirmed rather than assuming it from a photograph. The product inquiry link carries the selected options to the contact page; review them before sending the message.

Request information

Request product information or a catalog from AKA sales. Include your selected model, size and color so the team can respond to the exact version you are considering. For projects, add the required quantities and any installation constraints. This website introduces the collection and receives inquiries; product selection continues through direct contact with AKA.