Cylindrical Stainless Steel Trash Can

The Cylindrical Stainless Steel Trash Can by AKA brings a clean, understated waste solution to contemporary interiors. Its smooth cylindrical body is manufactured from premium 304 stainless steel and finished to reduce visible fingerprints. With seven size configurations from 15L to 45L, the collection can serve compact rooms, busy offices, hotels and larger commercial environments without changing its consistent design language.

A Minimal Cylindrical Bin for Modern Spaces

Simple forms are often the easiest to integrate into an interior. The straight cylindrical profile avoids unnecessary visual detail and coordinates naturally with stainless steel fixtures, neutral surfaces and modern furniture. Its open-top format also provides direct access for quick disposal in spaces where a pedal or moving lid is not required. This makes the bin especially useful in circulation areas, offices, hotel corridors and other frequently used locations.

Premium 304 Stainless Steel Construction

AKA manufactures the body from 304 stainless steel, a practical material for products designed for regular daily use. The metal surface is easy to wipe clean and gives the product a refined appearance suitable for both residential and professional settings. A fingerprint-resistant finish helps limit visible handling marks between routine cleanings, supporting a neater presentation in customer-facing interiors.

Seven Size Configurations from 15L to 45L

Capacity	Dimensions
15 Liters	40 × 30.5 cm
20 Liters	43 × 30.5 cm
25 Liters	53 × 30.5 cm
30 Liters — Slim	64 × 30.5 cm
30 Liters — Wide	48 × 36.5 cm
40 Liters	59 × 36.5 cm
45 Liters	66 × 36.5 cm

The 15L and 20L options are well suited to smaller rooms and moderate daily use. The 25L version adds capacity while retaining the slimmer 30.5 cm diameter. For 30L requirements, buyers can choose between a tall slim format and a shorter wide format. The 40L and 45L models use the wider 36.5 cm body, providing more volume for higher-traffic environments.

Choose the Right Proportion for the Location

Capacity alone does not determine how a bin fits into a room. The two available body diameters make it easier to match the product to the available floor area. A taller 30.5 cm model can fit beside desks, counters or narrow architectural elements. A wider 36.5 cm model offers greater capacity with a lower profile, which may work better in open commercial areas. Before ordering, compare both the height and diameter with the intended placement.

Four Coordinated Finish Options

The Cylindrical Stainless Steel Trash Can is available in gold, black, steel and white. Steel provides a classic stainless appearance, while black creates stronger contrast in modern interiors. Gold can complement premium hospitality and retail concepts, and white works naturally in bright, minimal spaces. Actual finish selection can be coordinated with project quantities and interior requirements.

Recommended Applications

• Corporate offices and shared workspaces
• Hotels, corridors and hospitality interiors
• Retail stores and reception areas
• Residential utility rooms and kitchens
• Restaurants, cafés and commercial spaces
• Public-facing areas that need a simple open-top bin

For a hands-free alternative with a lid, compare the stainless steel pedal bin. To confirm finishes, quantities or the most suitable size for a project, contact AKA Luxury.

Why Choose the AKA Cylindrical Trash Can?

This AKA collection combines a durable stainless steel body, a restrained cylindrical form, four finish choices and a broad capacity range. The two 30L proportions give specifiers additional flexibility, while the consistent design makes it easier to use multiple sizes across one project. Facility teams can also standardize the appearance of waste bins while selecting a different volume for each room. The result is a straightforward waste solution for interiors that need practical capacity without visual clutter.

SIZED FOR EVERY SPACE

Seven Configurations, One Minimal Form

Choose from 15L to 45L capacities, including slim and wide 30L formats. The consistent cylindrical design and four finish options make it easy to specify coordinated bins across different areas of a project.

304
Stainless Steel

15L–45L
Seven Configurations

Fingerprint
Resistant

Understanding the entry shape

The opening is a useful starting point when comparing this model with other AKA bins. A fully open top, an inclined entry and a domed front-facing opening create different approaches to the container. Examine the model-specific description and feature list rather than treating these shapes as interchangeable. Position the entry toward the direction from which it will normally be used. Keep furniture and doors out of that approach so that the visible opening remains accessible after the surrounding space is furnished.

Matching the size to the collection point

Capacity describes nominal volume; it does not, by itself, describe the body’s footprint or height. Review every relevant size row in the table below. Where two entries have the same capacity, their proportions can still differ. Check the actual location with a tape measure and compare those measurements with the recorded dimensions. For several collection points, use the same model family where a consistent appearance matters, while selecting each size according to the space and anticipated emptying routine.

Choosing an open-entry layout

An entry that is already open avoids a separate lid-opening action during disposal. That can be useful where quick access is the main selection criterion. It also means that the shape should be evaluated for the intended waste stream and the visual requirements of the room. An open or hooded appearance should not be interpreted as an air-tight seal, odor-control system or specialized safety rating. If the project requires any such property, ask for a model with that specification explicitly documented.

Reviewing the complete arrangement

Before fixing the position, consider how the container will be emptied and how the floor around it will be cleaned. Do not place the bin so tightly between other objects that its upper section or side opening becomes awkward to reach. In a front-opening design, the orientation is especially important; in an open-top design, clear access from above matters. Use the selected size and model name when requesting internal-container information, because an exterior photograph alone cannot establish all of the parts supplied.

Exterior choices

Gold / Black / Steel / White

The options above are the documented exterior choices for this record. Screen swatches are an indication, not a physical color standard. Where a combination names both body and top, keep the complete name in your selection. Availability of a particular combination for a particular size can be confirmed with AKA sales.

Reading the size table

The size table on this page is the reference for the variants recorded under this model. A capacity field and a dimension field answer different questions: capacity is a volume, while dimensions describe the physical space occupied. Keep the complete size row when comparing products. If a row contains an original dimension string without named axes, retain that string in the inquiry and ask for the corresponding technical drawing when necessary. Do not rearrange the numbers based on how tall or wide the product appears in a photograph. Fields that are not specified should not be treated as zero.

Choosing for the actual room

Think about the route people take through the room, the objects beside the product and the practical access needed for its normal use. A product that looks balanced in a staged photograph may need a different position in your own layout. For a project with several units, make a short list of positions and assign the model and size to each. Evaluate placement suggestions against the actual waste stream or accessory use; they are planning guidance rather than a technical certification for every environment.

Surface appearance and fingerprints

Fingerprint resistance is a shared surface property of the AKA range. It does not remove the need for routine cleaning or mean that the surface can never show marks. The visible result also depends on light and viewing angle: reflections on a steel or gold exterior can make a photographed surface appear brighter or darker. When matching several items, review them in the intended lighting and confirm the exterior combination. Keep surface properties separate from color names and from any unverified claim about the alloy grade.

Care and cleaning

Follow the care instructions supplied for the exact product and finish. For routine exterior care, use a soft, clean cloth and a cleaning method confirmed as suitable for that surface. Avoid abrasive treatment or experimenting with strong products when compatibility has not been established. Pay attention to the rim, base and areas touched during normal use. Treat removable components according to their own instructions, and do not assume that a lid assembly or other mechanism can be immersed simply because the body has a steel appearance.

A useful specification for AKA sales

A clear inquiry helps distinguish similar products and reduces the need for follow-up questions. Include the model name, selected size row, exterior color combination and the number of units required. Add the intended position and any clearance restriction that may affect the choice. If your project requires a specific technical property, list it as a requirement to be confirmed rather than assuming it from a photograph. The product inquiry link carries the selected options to the contact page; review them before sending the message.

Request information

Request product information or a catalog from AKA sales. Include your selected model, size and color so the team can respond to the exact version you are considering. For projects, add the required quantities and any installation constraints. This website introduces the collection and receives inquiries; product selection continues through direct contact with AKA.